China Rodamiento de rodillos esférico de jaula de acero específico Fabricantes

todas las categorias

productos nuevos

Rodamiento de rodillos esférico de jaula de acero específico

Home > Lista de Producto > Rodamiento de rodillos > Rodamiento de rodillos esféricos > Rodamiento de rodillos esférico de jaula de acero específico

Rodamiento de rodillos esférico de jaula de acero específico

Plazo de entrega:	20 días

Paquete:	1. Tubo plástico / cartón / paleta 2. Caja de papel / cartón / paleta 3. De acuerdo con los clientes \ 'requisito
Marca:	KONLON, KONLON o OEM
Lugar de origen:	China (continental)

Información básica

Modelo: 22212EW33C3

Descripción del producto

Especificaciones 1.Certificate: ISO9000-2008
2. Material: GCr15, GCr15SiMn
Tecnología 3.High-end y de primera calidad
5.Model: Serie de la jaula del latón del MB

1.Certificate: ISO9000-2008
2. Material: GCr15, GCr15SiMn, G20Gr2Ni4A
Tecnología 3.High-end y de primera calidad
4. Larga vida útil.
Serie 5.E, jaula de acero

*Spherical roller bearing* The self-aligning roller bearings are the roller bearings with two row inner ring raceways and self-aligning outer ring raceway. Therefore, it is provided with the function of self-aligning. It can auto adjust the eccentricity due to the mounting error or shaft bending. The bearing can still work normally when the centerlines of the outer and inner rings are within 1°- 2.5° relatively. It can bear the radial load and bidirectional axial load and it is more applicable to heavy load and shock load.
*Details:* Inner diameter is above 50mm Outer diameter is above 100mm Precision level:P0,P6,P5 Raw material:GCr15/GCr15SiMn or according to customers’ requirement Quality Certification:ISO9001:2008 Package:industrial standard/original manufacturer package

Spherical roller bearing

The self-aligning roller bearings are the roller bearings with two row inner ring raceways and self-aligning outer ring raceway. Therefore, it is provided with the function of self-aligning. It can auto adjust the eccentricity due to the mounting error or shaft bending. The bearing can still work normally when the centerlines of the outer and inner rings are within 1°- 2.5° relatively. It can bear the radial load and bidirectional axial load and it is more applicable to heavy load and shock load.

Details: